Thursday, 17 March 2011

Pirate - Waistcoat Pattern

I had a faded blue cotton canvas, quite a heavy one. I'd wanted it for my larp/medieval dress, but now I decieded it was the right material for the pirate's waistcoat.
I drew a pattern - originally it was a pattern of men shirt, I just didn't make the yoke and sleeves.

The armholes look a bit weird, I hope I'll be able to fix this at the fitting.
I cut the pieces out like this, so I had the chalk lines only on one side.
I laid a carbon paper with the colour upwards, put the waist on it. I pressed my dot-wheel at the lines so that the carbon paper left traces on the lower layer.

I basted the tucks, the shoulder and side seams.
I pressed the seam allowances and let's go for the fitting!

Pirate - Shirt's Cuffs

The cuffs are composed from two parts. I ironed the mounting on one piece of each part (to the one that's closer to the hand).

I sewed along the three edges of the upper parts. I cut the seam allowances to half a centimeter and turned the cuff right side out.

I made a line of stitches at all the edges.
I pinned one lower part to this and sewed in less than a centimeter. This compensates for basting.

I laid the other lower part to the upper one and sewed through all four layers in a centimeter distance. I stopped exactly where the upper part of the cuff ends.

I pushed the upper part of the cuff away and sewed perpendicularly to the first sewing. I stopped one centimeter before the end.

At this point, the cuffs were ready to be sewn in. I pinned and sewed the outer cuff to the right side of the sleeve.

Then I folded the inner cuff's seam allowance under and basted so that it would cove the previous stitches. I sewed over the lower part of the cuff at the right side.

I marked the size of the cuff at the fitting and made the fastening.
A pearly button and a hand-sewn buttonhole :)

Wednesday, 16 March 2011

Pirate - Shirt's Body

I gathered the sleeves at the hand and at the shoulder as well as the front part of the neckline.
I did it this way: I set the length of stitch to four milimeters, sewed along the edge, made one stitch up and sewed along the first line of stitches. Then I pulled the lower threads.

I had to add gores to the armpit. I serged the gores and the sleeves first. I sewed a gore to the sleeve, brought the needle down at the corner...

...turned the fabric and sewed plumb to the edge of the sleeve. I also turned the tip of the gore to me before sewing.

This allowed me to iron the gore like this so that I could sew the sleeves together without having any unwanted part of the triangle dangling out.

I pinned the gathered sleeves right side to the right side to the body.
I watched the lower edges of the sleeves to be at the same distance from the lower edge of the shirt.

I sewed the sleeves in. I pulled out the upper line of the gathering and serged the sleeve and the side of the body together.

I pinned the sleeves together. I payed attention especially at the starter point and the gore seam. I stopped sewing about ten centimeters from the end.

This part was reserved for the cuff slit. I ironed its edges flat.

I sewed the hips and pressed the seam allowances flat. I made slits here as well. I turned the lower edge right sides in and sewed a corner at the width of the seam allowance.

I turned the corners to the right side and I sewed the lower hem and the slits in one operation.

Saturday, 12 March 2011

Pirate - Shirt Beginning

My new task - Jack Sparrow's garments:-)
Not exactly this one (the waistcoat will be cut differently), but mostly yes.

I prepared the shirt for the fitting - I assabled only the right sleeve as you can see:-)
After the fitting, the pattern is something like this. I had to add the armpit gores for comfortable wearing.

I started with the neckline slit. I sewed two strips on along the cut.

I made the cut a little longer and made two cuts to the last stitches os the seams. I folded the strips around the edges, tucked the little triangles under and sewed them on the place.

I folded the rest of the strips around, basted and attached them by hand.

I ripped the basting out and ironed.

Saturday, 15 January 2011

Staff Case

A case for my training fire staff. Has been in my head for quite a long time:-)

I pinned these hexagons on and attached them with my favourite decorative stitch.

I sewed the sides and made a tunnel for the cord. I added a pleat at the bottom to provide some space.

I love one day projects! :-)

Tuesday, 2 November 2010

Small Kilt - Done

I laid the pieces according to the markings from the fitting.
I put the fastening on them and marked the positions.

I pricked the stitch holes and sewed the leather strips on with a backstitch.

I sewed through all the layers so that the fastening would be stronger.

I sewed on the buckles.

I punched the holes and cut out the tips.

Finished small kilt.
Well, not a real kilt, of course:-) But enough for the LARP, I hope..

Wednesday, 20 October 2010

Voi

I've got an order for a pair of voi - veil poi.
You just attach your belly dance veil to the ball and that's it.
I sewed two and two eye-shaped pieces at one side together.
Then I sewed these two together inserting a loop and a cord.

I cut triangles out of the seam allowances and turned the balls inside out.

I filled them with sand and sewed the hole with the whip stitch.

I attached the swivel handles and here it is.
The veil should be just easily knotted to the loop at the bottom.

Sunday, 3 October 2010

Small Kilt - After the Fitting

At the fitting, I marked the overlap of both pieces.

I double folded and sewed the edges. I hemmed the lower edge by hand so that no stitches are visible. I sewed the pleats.
I cut the unnecessary material at the pleats (otherwise it would be thick as hell), traced the shape on the lining and added seam allowances.

I sewed the lining to the piece at the waist edge.
You may notice that I made two little pleats at the butt - to provide free motion in the skirt.

I turned the lining right side out and folded the upper corners inside. You can see that I folded in one whole pleat - the lining will make it head to the center of the skirt.

I folded inside and pinned the rest of the lining. I used my arranging mannequin to get the right shape:-D
I basted the lining and then sewed it onto the piece by hand.

Thursday, 16 September 2010

Three Fingered Gloves

When I saw this page (by Marc Carlson) I knew it would be the right for me. My usual problems with patterns occured. It took me about one day just to get the right shape and size. I produced some (many) models and finally I got it.

I had wanted to make it of the leather but in the end after some meditation I bought a FUR-LIKE PILE FABRIC (pshaw), for which I'm not proud of myself at all. However will heat more than a raw leather. Anyway, I saw fur inside the gloves on the pics and had no natural fur:)
I made the pattern for the body of the glove and transferred it to the fabric with a marker (not very good as well but I hate that the chalk disappeares regularly from my patterns:) ). Sewn. The hole's not developed yet.

Then I tried to make a thumb. Both patterns can be seen below but don't mind the hole. It was drawn on the glove on my hand. You can notice that in my pattern there's a v-shaped space between the fingers, although in the original one there's just a vertical straight space. I tried it ot first but the fingers seemed to cross slightly when I put the glove on.

So this all was done on the machine and now I had to use my hand's best:) It was a "hidden backstitch" as I call this marvellous stitch which, in my opinion, can resolve almost any problem as far as sewing:)

I don't like artificial furs at all. But finally I had to admit it would look better with it visible.. I pinned the bottom and folded the upper part to sew it with the magic stitch again.

Call me Donatello! (For those who don't watch Ninja Turtles these creatures had three fingers.)

I didn't attach the loop that was usually on the original pictures, from this fabric you can't cut a strip as easilly as from the leather.

I just love my gloves. As always, they're quite tight (improbable for a gothic garment supply). But it fits well.