Showing posts with label belly dance. Show all posts
Showing posts with label belly dance. Show all posts

Saturday, 12 November 2016

Heart Case for Bellydance Fans

Present for my friend, great dancer and creator and director of a belly dance show Dreams Come True. I was returning her the led-light silk fans that we used for the show.
The logo of the trademark. I printed it on paper and sewed through it to transfer the font on the fabric. I tore out the paper.
I set a very short zig-zag stitch and I sewed each shape twice. There's a fusible web at the wrong side and I used an embroidery frame for the best results.
I quilted through two fabrics and batting. It's a nice heart pattern. It will be a hearty heart with a heart logo. Madness :-P
Two quilted hearts.
I made a strange looking pocket for the batteries. I didn't want to damage the quilting with straight lines so I just retraced some of the hearts.
The fastening. I quilted through one strip of fabric, cut it in the middle and swapped the halves.
I sewed two squares of fabric to each end. 
I folded the edges inward and sewed in the zipper.
The bottom is a single layer of twill because it must be wider than the top and it would look strange I think if it was sturdy and keeping this shape all the time...
The edges are sewed together, cut to two milimeters and covered with bias tape.
When I woke up in the morning, I found my cat sleeping inside this :-) I couldn't get her out...
Handle. Ironed like this with interfacing on the wrong size, folded in the middle, ironed again and sewed.
Finished.
She could use it as a handbag for dance lessons if she wants to. Or at least for three fans.

Sunday, 29 May 2016

Belly Dance Veils

Dealing with lightweight fabrics may be tricky, but I think I finally have a knack for it.
I no longer iron the folding of the hem before sewing. Instead, I fold it in hand just before sewing and pull it tight, making sure that the weft threads go horizontally at the hem.
Also beginning and ending of the seam needs more attention. I put a piece of paper underneath and carefully tear it off when finished.
The heap of my silky veils. They'll be used for voi poi. Measurements are like 90 x 220 cm.
And here are organza ones. The upper hem is done with regular sewing machine, the curved edge needs an overlock machine. These are regular belly dance veils, measurements are 100 x 230, the curve may be 45 cm high.

Monday, 25 August 2014

Bellydance Lace Skirts

Our friend's having a wedding and we decided to dance there. We wanted to make skirts in gold - the wedding will be gold, white and yellow.
The pattern is very simple and leaves the least remains possible. You just cut out a stripe from the fabric, fold it five times, pin the template on and cut five times at once.
It always gives you five big and five small pieces.
I folded the belt in half, tucked both edges in and ironed. I put twenty big pieces inside to get the hips' size minus 6. Then I laid another layer of small pieces, to the middle of the big ones.
 I sewed along the edge. I'd tried to pinn it so that the pins can stay there (quite far to the left).
 And the finished skirt.

Wednesday, 22 January 2014

Belly Dance in Blue&Brown - Bra Flowers

I drew a pattern on the right cup. Then I transferred it to the left one - I chose several points. At each point, I measured its distance from two other points (the center of the bra and the upper edge).
Boring work but efficient.
I spent a long time deciding about what the steams will be from. I didn't want spangles (which are the most comfortable to sew for me)...
I used something most jewelery crafters would probably tear my head off. I bought caps for covering pearls. I just liked that their gold shines like metal, unlike all of the plastic beads painted with some kind of goldish color...
I love gems, I just didn't get the color right. I should rip them off and start again with something blue or green or I don't know. I've chosen fabric colors that are quite difficult to match decorations to, it just drives me mad...

Wednesday, 27 November 2013

Belly Dance in Blue&Brown - Bra Covered

Just a little update on the bra - covering the bra with the fabrics is successfully finished. Hooray!
 The wrapping effect was quite easy to do - I sewed the edges, leaving a lot of fabric in the middle and attached it with tiny stitches, gently gathering it every time.

Thursday, 24 October 2013

Belly Dance in Blue&Brown - Covering the Cups

I feel like making myself a new bellydance costume. I believe I've learnt my lesson from the last attempt and I will only use stretch fabrics for covering the bra :-]
 The pattern. I put the lovely blue fabric on the cup and pinned it on, eliminating every wrinkle by stretching it, mainly diagonally. Then I cut it out leaving a 1.5cm seam allowance. I cut the other half symmetrically. The result should resemble a rectangle more than circle...
 I pinned it on again. Those who are not lazy can baste the right side at the edges - it simplifies the work a lot.
 I folded the seam allowance in a half and carefully attached it to the bra. It's ok to pull a bit to keep it smooth.
 Just tiny little stitches. If you baste it, you can get rid of the pins.
Around the cups, I sewed tiny back stitches.
 You can see the brown fabric too - it's tie-dyed and has some blue spots :)
The center is probably the hardest part. Not much space to manipulate...

Sunday, 25 January 2009

Saidi Costume Finished

The performance was outstanding. Opposite to the photos..

I didn't have time to decorate the belt, so I just glued some gems on a while before the dance:-o
The dark blue streak is ink. It looks like an intent, doesn't it?:-D

Saturday, 24 January 2009

Blue Bra Beadwork II

The green leaves are finished. Now I got down to the spangles. My inspiration - peacock feather.
I started with the dark blue center. After several trials, I decided that I should cover the hole in the center by a bead. The surface isn't so smooth, but it looks more professional.

I went on with light blue. I processed from the center outwards; it was quite difficult to create neat edge. At the dark green I made the outline first and then I was just fulfilling the inside space.

Two rows of light green are finishing the spangles.

I marked the distances and glued on some gems. I also wanted to cover the blue cups' fabric around them with beads, but it was ten o'clock and my boyfriend told me no way.

I should sleep enough. The performance is tomorrow.

Friday, 23 January 2009

Blue Bra Beadwork I

So this is what I have. The dress with decorated edge of sleeves and the bottom, and blue but not decorated bra.

I bought a sack of artificial gems. I drew the lines and distances by disappearing marker and glued the stones. Then I took green cylindrical beads and and began to create small green leaves (always by three beads at one stitch).

This took me about the whole today. Don't have a picture, so I'll surprise you with the result at the next post:-)

Thursday, 22 January 2009

Blue Bra Cups

How to get nice bra cups from not-so-elastic fabric? :-)
I found out that not only canvas, but even this fabric is the most stretchy diagonally. I fulfilled the bra with my sweater and started to strain. First, I pinned the two spots on the vertical axis, then the sides. Having this part of the work succesfully done was a great relief.

I used to use backstitch, even invisible backstitch when necessary, but now I prefer other things. I drew a line at the base, along the whalebone. Then I pricked the needle upwards to this place, arrange the cup's fabric and brought the needle down through it (very, very small stitch). In fact, this was quite pleasant:) I don't mind the pattern the stitches make.

Well, the worst is over. Only bead embroidery's in front of me and I'm looking forward to it!

You may see that the center isn't really symmetrical and neat. That's because I didn't want to spend much money on a bra that wouldn't be visible and I which I would use only couple of times a life. Cheap bra and luxurious fabric seems better to me than the contrary.

Wednesday, 21 January 2009

Blue Bra Covering

I was scared about how I would get the fabric on the bra. Actually scared.
Eventually, I took courage for a small trick. I took the hot melt glue gun that had saved me at the clawn hat:-)
I glued the edges on.

Then it was quite comfortable just to trim the excess, fold it and attach with stitches that serge at the same time. The fabric was fringing, I might have ironed an unwoven fabric on, but it would lose elasticity..

Another brain teaser was how to attach the shoulder strips to the cover fabric. I found out at the second one. The piece has been folded so that the folded neat edge was overlapping to the wrong side of the bra.

As the blue fabric wasn't very stretchy, I covered two fasteners and left the only one that allowed the biggest size. I sewed on a small rectangle of fabric, folded in on the left side for the neat hem.

Then I sewed these two pieces together with tiny stitches. Even inside the fastener for god results.

So this is what I got today. Belly dance bra with lace apricot cups:-P