Showing posts with label flag. Show all posts
Showing posts with label flag. Show all posts

Monday, 25 January 2010

Velvet Standards - Getting Lillies Together

I sewed the flags in the middle. I had to baste them carefully and I used a walking foot. I ironed the seam and I also folded the lower edge near the seam up.

Sometimes, I'm really desperate about velvet. I basted the three free sides of the square. I often made a backstitch to hold the fabric more tightly in place.

I used my walking foot again. You can see that I stitched near the line I made before when sewing fringe on.

And when I finished? I moved half a cm. If you had any advice on how to sew with velvet, I'd be pleased to hear.

I'll try to finish this piece as if it was sewn OK and see what it will turn into. I'm considering sewing the next flag in hand :¨-(

Monday, 11 January 2010

Velvet Standards - Lillies Finished

Some more pictures from the embroidery. Here you can see how I join the curves. I learned to make a peak - I hold the fabric with only one hand while the other's turning the stitch width wheel slowly down to zero. Then it's easy to cover this end with another line.

I also try to keep the order of layers - the last to be embroidered at every lilly is the center. It's the uppest layer and just before doing it, I cut all the threads and the last line of stitches will hide them.

Now, I have the two parts of the flag prepared. This was the easier work:-)

I bought red fringe, sewed it on one of the parts, on the right side, facing inside. I didn't sew to the corners, a cm before them I sewed in 45° angle.

Completing the flag is what I'm not looking forward to:-/

Sunday, 3 January 2010

Velvet Standards - Lillies Prepararation

Four velvet double-sided standards, what a terrible work they made out for me! :-)
As the first one, I decided to make the one with French lillies. The smallest and easiest shapes to get the skill.
I cut them in two layers, drawing the shape roughly around the pattern.

I ironed vlieselin on, then put one more with the glue facing up, drew the lilly on it and sewed the upper vlieselin to the rest in the marked lines.

Then I cut the shape two milimeters from the stitches and I could iron it on the flag.
What would you think I managed to? Yes, I sewed one piece of vlieselin with the glue facing in:-D

Fortunately, I managed to tear it off, pinn another one on and sew over the stitches. In the end, it wasn't even noticeable.

Flags, such a boring project, nothing to show.. So you may at least laugh seeing the little light dot on the red lilly. I was laughing as well, when I saw I had ironed the lilly on the flag with a pin left between:-)

Thursday, 30 April 2009

Gryffin Flag - Done

Here it is, my big application project.
In the end, when the flag was packed as a tube, the gryffin shrank anyway and my shar-pei unwanted effect got lost in it.

The think at the bottom is gold fringe.
I wanted a yellow one, but this must do.. :-)

Thursday, 16 April 2009

Shar-Pei

Not to post motivational pictures all the time, I have one demotivational for you. What is it like to make an application on a huge flag? :-)

Pulling the flag through the machine, there and back again and again.. The glue probably needs less than this to unstick from velvet. Quite unpleasant.

I sewed these parts first as they should be under the other layers in the end. When I have sewn a piece of a line, I re-iron the part of the gryffin that's to be sewn as next.

A word to the technique - when you make a sharp tip, it quite often happens that when you turn the application and sew back over the stitches, the needle gets stuck and the fabric's not flat eventually. I solved this by using a bit longer stitch for these places. Than the feeding works stronger.
The high curvature. Another hard matter. I cheat by sewing to the middle of the arch, turn (too much) and finish the curve. It's not a perfect arch, but it looks so:)

I'm really sorry about this. Hours of work and you get a hybrid of gryffin and shar-pei. The legs weren't glued enough and moved when I sewed them. When ironing them again, this occured.

The gryffin's done.

Wednesday, 15 April 2009

Gryffin Flag

I finally got to the gryffin flag. I peeled the paper off. I was very curious if my trick would work. I laid the animal flat and ironed (over the baking paper). It held nice:)
I might have bought a spray textile glue, but I couldn't imagine how I would aim where the application should be..

When I was tearing the paper to peel it easily from the application, I realized one think. If I hadn't, I could have got an exact tamplate (ironable, after my ways of storing patterns it would be handy:-)). Next time I will keep it.

Wednesday, 8 April 2009

Gryffin Flag - Preparations

My new project - huge heraldic flag. I often wish we had chosen a simpler sign:-D
I found a new product in a store - vliesofix. It's a glue that's usually on vlieselin, but just on a paper. I traced the picture to the paper (mirrored) according to the instructions. I roughly cut it out.

I cut out a piece of vlieselin even bigger than the previous one (at first wrongly mirrored:-D, but the second attempt was ok) and ironed it on. It's necessary, the glue itself can't prevent the fabric from fraying.

Then I ironed the vliesofix on. To protect both the iron and the fabric I did it over a baking paper. If you have your iron too hot, this ensures the glue won't stick to it.

Then I could cut the gryffin out. And it's not a matter of quarter an hour:) I like snipping the shape so that the tips of feathers and claws and hairs touch the first shape, at the second turn I cut out the details.
It's comfortable to have the exact line on the paper. I can't imagine I would have to draw it on the fabric with charcoal or with my superspecial marker that disappears within twenty minutes..

This way I should have the same result as if the vlieselin had glue on both sides. I wonder why something like that cannot be had at us:-)

Friday, 1 February 2008

Red Flags

First blue meter (of fabric:-D ) is finished, now I got down to the red chunk.
The pattern has been drawn from majority by my boyfriend, great, cause I hate that :-P

I folded them all at once, on one hand it might be faster, on the other hand it's too late for a machine noise..

Tuesday, 29 January 2008

Small Flags

I have the first flags done. This is how I proceed. As I said this pattern is more simple than the previous that I had made. It has more to do with origami, which I'm quite good at:-P

I fold two longer sides, by sight, width of half the shortest side.

I cut the pike in a bit smaller angle than is of the triangle in the center. It's better to cut it after folding because it doesn't fray out and deform while folding that much.

I sew the folded part and as I have really many pieces I don't snip the thread and I get a continuous belt of these. I solve the threads in the end offhand. I just cut it, no lock, no tie, it will be places inside.

And the origami part - I fold the corners along the drawn line and the whole unsewn side according to this line.

Sewing with a lock on both sides - this part will be stressed.

The first eight flags. Four flags take about half an hour.

Monday, 28 January 2008

Small Flags Pattern

I have a task - to make little triangular flags (hung on a cord) to limit our perform space. Many they'll be.
I did this some time ago but with a different pattern. This one is very simple, just a triangle without a tip.

I want to vary blue, red and yellow triangles.